Here you can see the 120mm fan and the three (3) position switch which is directly above the fan. This fan like 230mm fans is extremely quite and does a great job of pulling heat out of the case.

Talk about a blow hole in a case, how about a 230mm one? Yes indeed this bad boy has enough top draft that you won't ever have to worry about the heat accumulating at the top of the case, with a side and top mounted 230mm fans and a matching set of 120mm up front and one at the rear you will have near perfect positive case ventilation.

Here you can see the front of the case after we have removed the front bezel from ,o visible are the two 3.5" drive cages and the matching 120mm fans that fit inside of each of them.

Here you can see the blue LED fan that is housed inside of the four position drive cage. One small thing I would have liked to have seen is a combination three or four pin power connector along with a Molex connector which is on it.

The second picture we took is to show you that the inside of each of the hard drive cages has a foam rubber padded attached to each side of the drive cage. This does a great job of quieting a noisy hard drive especially after you have changed the settings on it for maximum speed or noise ratio.